Product Details:
Payment & Shipping Terms:
|
| Mounting: | Free Standing | Warranty: | 1 Year |
|---|---|---|---|
| Feature: | High Pressure | Bearing: | FAG, SKF, ZWZ, C&U |
| Voltage: | 220v,380v,420v | Frequency: | 50hz/6hz |
| Highlight: | high pressure centrifugal blower,high pressure air blower |
||
Industrial Rotary Kilns High Pressure Blower Forced Draught Fan Low Noise
The Model 9-19 and 9-26 high-pressure centrifugal fan is extensively applied to transmit materials. The transmission medium is air or other non-flammable gases, which are harmless to human.It is also used to deliver grain, fodder, ore powder, plastics, etc. in the processing industries. It is also suitable for the combined use with carton machinery and tempered glass equipment.
|
Industrial Rotary Kilns High Pressure Blower Forced Draught Fan Low Noise |
|||
| Centrifugal fan | Air Flow | 6000~41500 | m3/h |
| Pressure | 3500~1500 | Pa | |
| Rotating speed | 2900/1450/960 | r/min | |
| Material | Carbon steel | ||
| Motor | Power | 7.5~410 | kw |
| Voltage | 220/380/440/6000/6600 | v | |
| Frequency | 50/60 | hz | |
Inlet
The inlet shall be designed in line with aerodynamics. It shall be streamlined for better airflow movement and efficiency, reducing turbulence and sound.
Belt Drive and Coupling Drive
The fan shaft shall be treated through hardening and tempering and finish turning processes up to the hardness level of HB250-280. Its maximum load shall be 35% more than the highest fan speed. The shaft shall be supported by two bearings with L10 rating service life of over 80000 hours. It shall be sealed and can be lubricated under normal operating temperatures. The pulley shall be of cast iron type and shall be sized for a minimum of 150% of the driving power. There shall be pulley and belt guard. Flexible coupling equipped with a guard shall be used. The factor of safety of power transmission and torsion shall meet the design requirements.
Motor
The motor shall be carefully matched to the fan load. It shall be IP54 rated with class F insulation. Ball bearing that can be lubricated shall be used. The motor and drive mechanism shall be isolated from the airstream to avoid grease or dirt accumulation.
1. For transport gerneral gas, the gas should not contain any sticky substances, which the dust or solid particles should less than 100mg/m³.
2. For equipments or system of filtration & drying, fume hood & spray booth, paiting room,food processing , kitchen room and so on.
3. Ventilation (supply or exhaust) system and industrial(HVAC) applications where moderate capacities at low pressures are required such as building, air-conditioning,firfighting, air circulation orcooling and so on.
Centrifugal fan production process:
Case Show:
Contact Person: DAJING FAN
Fax: 86-0373-4693-858
